Back to Top

1
Hi, Guest!
  • SCHNEIDER ELECTRIC
  • APM6A0CTLY6 standard ATV600 control unit, APM, single drive, 500…690V

APM6A0CTLY6 Standard ATV600 Control Unit, APM, Single Drive, 500…690V

Update Terakhir
:
15 / 03 / 2024
Min. Pembelian
:
1 Unit

Harga

CALL
PT. SURYA HAWILA PERKASA , founded in 2006 has been growing up to a leading one-stop soluton provider for intelligent electrical distribution and energy efficiency systems.

We gives the best solutions for Industrial Automation products and services, Electrical, consultant, training.

Detail APM6A0CTLY6 Standard ATV600 Control Unit, APM, Single Drive, 500…690V

Control Module

standard ATV600 control unit, APM, single drive, 500…690V

Spesifikasi

Main
Range of produc
Altivar Process Modular : Product or component type

Control module
Device short name : APM
IP degree of protection :
- IP00 conforming to IEC 61800-5-1
- IP00 conforming to IEC 60529
Kit composition :
- Control unit
- graphical display terminal
- Digi-Link cable
- cable 24 V
- cable for voltage measurement
Supply frequency : 50...60 Hz - 5...5 %
Safety function : STO (safe torque off) SIL 3
Discrete input logic : 16 preset speeds
communication port protocol :
- Ethernet
- Modbus serial
- Modbus TCP

Complementary
[Us] rated supply voltage : 500...690 V
Frequency resolution :
- Display unit: 0.1 Hz
- Analog input: 0.012/50 Hz
Connector type :
- RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP
- RJ45 (on the remote graphic terminal) for Modbus serial
Physical interface : 2-wire RS 485 for Modbus serial
Transmission frame : RTU for Modbus serial
Transmission rate :
- 10/100 Mbit/s for Ethernet IP/Modbus TCP
- 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
Exchange mode : Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
Data format : 8 bits, configurable odd, even or no parity for Modbus serial
Type of polarization : No impedance for Modbus serial
Number of addresses : 1…247 for Modbus serial
Method of access : Slave Modbus TCP
Supply :
- External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection
- Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
- Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
Local signalling :
- 3 LEDs for local diagnostic
- 3 LEDs (dual colour) for embedded communication status
- 4 LEDs (dual colour) for communication module status
Width : 230 mm
height : 678.3 mm
Depth : 108 mm
Net weight : 7.1 kg
analogue input number : 3
Analogue input type :
- AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bits
- AI1, AI2, AI3 software-configurable current: 0...20 mA/4...20 mA, impedance: 250 Ohm, resolution 12 bits
Discrete input number : 8
Discrete input type :
- DI1...DI6 programmable, 24 V DC (<= 30 V), impedance: 3.5 kOhm
- DI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
- STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhm
Input compatibility :
- DI1...DI6: discrete input level 1 PLC conforming to IEC 61131-2
- DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68
- STOA, STOB: discrete input level 1 PLC conforming to IEC 61131-2
Discrete input logic :
- Positive logic (source) (DI1...DI6), < 5 V (state 0), > 11 V (state 1)
- Negative logic (sink) (DI1...DI6), > 16 V (state 0), < 10 V (state 1)
- Positive logic (source) (DI5, DI6), < 0.6 V (state 0), > 2.5 V (state 1)
- Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1)
analogue output number : 2
Analogue output type :
- Software-configurable voltage AO1, AO2: 0...10 V DC impedance 470 Ohm, resolution 10 bits
- Software-configurable current AO1, AO2: 0...20 mA, resolution 10 bits
Sampling duration :
2 ms +/- 0.5 ms (DI1...DI4) - discrete input
5 ms +/- 1 ms (DI5, DI6) - discrete input
5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input
10 ms +/- 1 ms (AO1) - analog output
Accuracy : +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input : +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Linearity error : AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input
AO1, AO2: +/- 0.2 % for analog output
Relay output number : 3
Relay output type :
Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles
Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles
Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
Refresh time
Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
Minimum switching current
Relay output R1, R2, R3: 5 mA at 24 V DC
Maximum switching current
- Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC
- Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC
- Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC
- Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
Isolation : Between power and control terminals

Environment
Insulation resistance : > 1 MOhm 500 V DC for 1 minute to earth
Noise level : 69 dB conforming to 86/188/EEC
Power dissipation in W : Forced convection: 2390 W, switching frequency 2.5 kHz
Maximum THDI : <48 % full load conforming to IEC 61000-3-12
Electromagnetic compatibility :
- Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
- Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
- Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
- 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
- Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
Pollution degree : 2 conforming to IEC 61800-5-1
Vibration resistance :
- 1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6
- 0.5 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
Shock resistance : 7 gn for 11 ms conforming to IEC 60068-2-27
Relative humidity : 5…95 % without condensation conforming to IEC 60068-2-3
Ambient air temperature for operation :
-10…40 °C (without derating)
40…50 °C (with derating factor)
Ambient air temperature for storage : -40…70 °C
Operating altitude :
- <= 1000 m without derating
- 1000...4800 m with current derating 1 % per 100 m
Environmental characteristic :
- Chemical pollution resistance class 3C3 conforming to IEC 60721-3-3
- Dust pollution resistance class 3S3 conforming to IEC 60721-3-3
Standards :
- IEC 61800-3
- IEC 61800-5-1
- IEC 61000-3-12
- IEC 60721-3
- IEC 61508
- IEC 13849-1
product certifications : TÜV
Marking : CE

Packing Units
Unit Type of Package 1 : PCE
Number of Units in Package 1 : 1
Package 1 Height : 18.000 cm
Package 1 Width : 28.700 cm
Package 1 Length : 73.500 cm
Package 1 Weight : 7.726 kg
Unit Type of Package 2 : P06
Number of Units in Package 2 : 6
Package 2 Height : 75.000 cm
Package 2 Width : 60.000 cm
Package 2 Length : 80.000 cm
Package 2 Weight : 48.000 kg
Tampilkan Lebih Banyak
Kontak Kami